Scanning and Repairing Drive Stuck? Let’s Get It Fixed Easily

Jason

By Jason

Update on

Scanning And Repairing Drive Stuck

If you are using Windows 10, scanning and repairing drive stuck would be an annoying issue for you. In fact, a considerable number of users across various regions have already experienced this issue.

In certain cases, scanning and repairing drive stuck can last up to several hours. Moreover, some computers give this trouble every time it is switched on.

Well, if you are looking for a solid solution to overcome this issue, this is a must-read article.

Reason for scanning and repairing drive stuck on your Windows 10 computer

The reason behind the scanning and repairing drive stuck on Windows 10 is an improper shutting down. That means that if your Windows computer hasn’t been shut down properly, you are likely to experience this annoyance. The improper shutdown can often appear due to power failure.

Also, it can occur as a result of a forced shutdown. You may see the error message from the first time you switch on the PC after an improper shutdown.

When Windows OS is running, the relevant operational data will be read and written on Random Access Memory (RAM). When the computer is shut down unexpectedly, the data stored in the RAM will be lost.

In addition to that, such an incident can cause damage to the hard disk as well. When you try to boot the computer next time, the system will automatically scan and repair those corrupted files.

We highly recommend our readers avoid turning off the PC improperly while it is functioning. Otherwise, you are likely to lose important data.

Also, get to know the best solution for the directory name is invalid and NTFS.sys error.

How to stop the scanning and repairing of the drive process?

It is true that the scanning and repairing process is likely to last for a considerable time. Wasting a couple of productive hours looking at your computer screen is a ‘crime.’

As of today, we all live a very busy lifestyle, and we can hardly wait for this process to be completed. In this case, you will have to find a way to skip this scanning and repairing process.

After booting the computer into normal mode, you can perform a manual scan and repair it later on. Repairing the drive manually is an exceptionally important process if you really want smooth performance from your PC.

Well, if you receive the scanning and repairing drive process, below are the steps to follow.

Please note that some of these methods work on Windows 10 Normal mode. Other methods are applicable when Windows doesn’t boot successfully. You may choose the method depending on the case.

Besides, here is the full Driver Talent review and how to fix Microsoft Compatibility Telemetry for you too.

Part 1. How to resolve ‘scanning and repairing drive stuck’ on Normal Mode?

In this section, let’s discuss two methods to fix scanning and repairing drive stuck that apply to Windows Normal Mode.

Way 1: Make use of the Windows Error Checking utility

In this method, we will be using the Windows Error Checking tool that is found in drive properties. Through this option, you will be able to scan and repair the potential issues on the drive.

The following are the steps you should follow to make use of this built-in utility.

1. Go to the File Explorer option located on the taskbar.

file explorer on task bar


2. Select the option “This PC” and expand the options to see Devices and Drives.

Devices and drives


3. Right-click on the drive that Windows tried to scan when you boot the computer. You can determine this simply by looking at the error message on the screen once again. The message usually says, “scanning and repairing drive (drive letter).”

drive properties


4. Go to the tab labeled “Tools” and click on the button “Check” located under the tab “Error checking.”

tools error checking


5. If there are errors on Windows, you will be able to see a message saying, “Repair this drive.”

Repair this drive


6. However, if there are no errors, you can see a message saying, “Scan drive.” You should click on “Scan drive anyway.” The operating system will start to scan and repair the drive by itself now.

scan drive


7. Perform a reboot on the PC and see if the problem is solved.

Way 2: Perform a drive status check

If there are issues associated with the drive, you will see that Windows will detect them. Then, the system itself will help you scan the errors and repair them.

To fix these issues, like ‘scanning and repairing drive stuck,’ you will have to check the drive status. Follow the steps mentioned below to do it.

1. Go to the Control Panel of the computer

2. Change the view of the window to small icons and select the option “Security and Maintenance.”

Security and Maintenance


3. Click on the option “Maintenance.”

Maintenance


4. Under the option “Drive Status,” you will see that there are several potential issues listed down.

Drive status


5. Each of those issues will accompany a link.

6. Just click on the relevant link to repair the respective drive.

Part 2. How to resolve ‘scanning and repairing drive stuck’ if Windows doesn’t boot

As mentioned before, this section explains what you should do to resolve the ‘scanning and repairing drive stuck’ issue if Windows doesn’t boot

Way 1: Perform a CHKDSK through Safe Mode

As the first step of the process, let’s see how to run the CHKDSK command through Safe Mode. This process is a pretty simple one, as you don’t need any expertise to do it. If Windows doesn’t boot successfully and you need to skip scanning and repair the drive, this would be handy.

1. Boot your Windows computer in Safe Mode

2. On the keyboard, you should press the Windows and R keys simultaneously and open up the “Run” command

3. Then, type in the letters CMD and press Ctrl + Shift + Enter keys simultaneously. This will open the CMD in administrator mode. If you press OK or press the enter key, you cannot enter the command prompt through the administrator mode.

run cmd


4. You will then have to type the command mentioned below
chkdsk x: /f

chkdsk c: /f


Please note that the letter “x” should be replaced with the relevant drive letter where you see the issue.

5. At the completion of the scan, you will be able to restart the computer. You should then check if the issue is fixed.

Way 2: Use Safe Mode and enter “Repair-Volume -DriveLetter”

This is another method you should try to make a PowerShell utility on the system. It will run the specific command, Repair-Volume -DriveLetter. This option will scan for hard disc errors and repair them easily.

Mentioned below are the steps to do so.

1. Boot your computer on Windows 10 Safe Mode.

2. Key in the letters “powershell” in the search box and bring the menu up.

3. Right-click on Windows PowerShell and then select the option “Run as Administrator.”

Run as administrator

4. You should now type the command lines mentioned below and hit “Enter.”
Repair-volume -driveletter X

Repair-volume -driveletter X


Please note that you will have to replace the letter “X” with the drive you intend to repair.

5. At the completion of the process, you should restart the computer and see if it is solved.

The above options should fix the issue for most of the users. However, if they don’t, you should try updating the drives. That is because, in certain cases, even outdated or crashed drives can be the cause.

Updating Drivers

Although updating drivers is not that hard for many users, it can be a time-consuming task. If you’re a novice or don’t have time to waste on updating drivers manually, try a professional tool. This is when a driver updater like Driver Easy comes to play.

With the assistance of Driver Easy, you will be able to update all the outdated drivers at once. Finding the most appropriate driver version and installing it is pretty simple with Driver Easy. This tool will save you plenty of time and protect you from drivers that have malicious software.

By using the free version of Driver Easy, you can download and install the drivers one by one. However, if you need to download and install all the drivers with the two-click operation, use Pro Version.

Here’s how to use it

1. Download the Driver Easy software and install it.

2. Launch Driver Easy software and hit the “Scan Now” button.

Driver Easy Scan Now

3. Now, Driver Easy will perform a thorough scan on the computer and see if there are any issues.

4. Click on the “Update” button next to each device and get the drivers downloaded.

Driver Easy Need Updated Drivers

5. However, if you have the pro version, you can download and install all the drivers at once.

FAQs

Q1: How long does the scanning and repairing process usually take? The duration of the scanning and repairing process varies depending on the size and condition of your drive. It can take anywhere from a few minutes to several hours.

Q2: What should I do if the scanning and repairing process keeps getting stuck? If the process repeatedly gets stuck, try the troubleshooting steps mentioned in this article. If the issue persists, it is advisable to seek professional assistance.

Q3: Will the scanning and repairing process erase my data? No, the scanning and repairing process is designed to fix errors and inconsistencies on your drive without affecting your data. However, it is always recommended to have backups of your important files.

Q4: Can a virus cause the scanning and repairing process to get stuck? Yes, a virus or malware infection can disrupt system processes, including the scanning and repairing process. It is essential to have reliable antivirus software installed and regularly updated.

Q5: Why is it important to maintain sufficient disk space? Maintaining sufficient disk space allows the operating system to function optimally. When the drive is nearly full, it can lead to performance issues and potential drive errors.

Conclusion

Encountering the “Scanning and Repairing Drive” stuck issue can be frustrating, but with the appropriate troubleshooting steps, you can resolve the problem and get your computer back to normal.

Remember to follow the outlined steps, perform preventive measures, and seek professional help if needed.

Jason
Jason

Skilled software testing specialist with expertise in comparisons and research, passionate about blogging, reviews, and creating video tutorials.

THERE’S MORE TO READ.