How to Fix the ‘’ Issue

Most iPhone users come across the error ‘’ It happens when you try to switch on your iOS device, and it starts the usual startup screen, but your iPhone suddenly gets stuck on ‘Connect to iTunes‘ along with the message ‘’ Even after you try to plugin and restore it again, the screen shows the same error. So, how can you get rid of this screen?

To resolve this annoying error, you need to know the reasons behind it. This issue could occur due to many software-related problems. After learning about the causes, employ some of the most effective solutions for eliminating this issue from your iPhone. So, let’s begin without further ado!

Part 1: Reasons Why You Face the ‘’ Issue

When you come across the error ‘,’ there can be various reasons behind it. It could be related to either software or hardware. Here’s an entire list of causes that can trigger this issue.

  • In contrast, you could get the ‘’ error as a result of some defects associated with hardware. For instance, you dropped the phone pretty hard, and something in the motherboard got damaged, or your iPhone got exposed to water damage that led your phone to stuck at
Causes Related to Hardware
  • The first possibility could be that the latest firmware update or the firmware downgrade did not work well, and so, you eventually got stuck with the message ‘’
  • Perhaps, when you restored an earlier backup over the iPhone, the procedure might have finished off with errors, and consequently, you come across the ‘’ error.
  • Another cause behind this issue is when you restore your iPhone or jailbreak your device, but things do not go as you planned.
  • Unidentified errors occurred due to improper operations on the device.
Causes Related to Software

So, these are some reasons why you come across the ‘’ screen on your iOS device.

PS: learn more about how to fix the iPhone restore errors and how to approve iPhone with ease.

Part 2: Will Users Lose Their Data on iPhones?

When your iOS device gets stuck on the ‘’ screen, you can look for some solutions for fixing this problem. On the internet, there are lots of solutions available. However, most users in this circumstance show concerns over whether they will lose the data on their iPhones or not.

Usually, this depends on the method that they choose to fix this problem. Some methods will assist you in fixing this issue without any data lose over the device, while there are some that may need wiping off everything on your device for getting it fixed. In case the issue is related to software, then it could be eliminated without losing any data. If the problem is related to hardware, it becomes difficult to reserve the data on your device if the phone components need to be replaced.

Will Users Lose Their Data on iPhones

Besides, here are the best solutions for the iPhone ghost touch issue and get to know how to stop iTunes from Opening when iPhone is connected.

Part 3: Best Solutions for Bypassing the ‘’ Error

In case your iPhone gets stuck at ‘’ due to software glitches, then take the help of these proven solutions to eliminate this frustrating problem. Before you do that, have a look at a swift snapshot view of these different solutions in the comparison table below!

Solutions Ease of Use Time Required Data Loss Success Rate
iMyFone FixppoEasyFastNo100% (iOS issues)
Tenorshare ReiBootEasyFastNo100% (iOS issues)
Force RestartEasyFastNo30% (some issues)
Update iTunesA bit complicatedLongNo50% (some issues)
DFU ModeComplexTime-consumingYes80% (some issues)
Apple StoreComplexTime-consumingDepends100% (most software/hardware issues)

Method 1: Free Software to Resolve the ‘’ Issue

The error ‘,’ also called iPhone stuck in recovery mode, occurs due to software-related issues. Therefore, it is advisable to use a free iOS repair tool, iMyFone Fixppo, to fix all kinds of iOS issues. It comes with various special features, such as:

  • Users can exit the screen ‘‘ with just a single tap
  • It is available for free
  • iMyFoneFixppo is considered to be the most trustworthy and reliable tool as it resolves all iOS problems with 100% success.
  • Using this tool, users do not have to worry about data loss as Fixppo takes care of all concerns and resolves the iOS-related issues with no data loss.

Get iMyFone Fixppo

A. Resolve ‘’ with a single tap

Step 1: Download iMyFoneFixppo from the official website. After that, install and launch it and then choose the tab ‘Enter/Exit Recovery Mode.’

iMyFone Fixppo

Step 2: Next, connect your iPhone to your system and press ‘Next.’ Now, you will come across the tab ‘Exit Recovery Mode‘ as your device is already in the Recovery Mode. Hit the tab.

Resolve '' with a single tap

Step 3: After some seconds, you will successfully bypass the screen ‘’

Exit Recovery Mode to Fix the '' Issue

B. Employ ‘Standard Mode’ to resolve ‘’

If the problem seems more severe, then ‘Enter/Exit Recovery Mode’ won’t do anything. In that case, you need to employ ‘Standard Mode’ for resolving the issue. This mode does not result in any data loss. It is the main feature of Fixppo, which perfectly works for every iOS problem. Plus, it is very efficient and outstanding. So, let’s see how to fix ‘’!

Step 1: Download iMyFoneFixppo and click on the option ‘Standard Mode.’ Next, connect your device to the PC and hit ‘Next.’

Employ 'Standard Mode' to resolve ''

Step 2: The software will detect your device model details and provide the right firmware for it. Choose a firmware version that you like and click ‘Download‘ and move further.

Employ 'Standard Mode' to resolve ''

Step 3: Once downloaded, choose the tab ‘Start‘ and wait until the repairing procedure finishes. Now, you have successfully bypassed the ‘‘ screen, and your device will be back to normal without any data loss.

Employ 'Standard Mode' to resolve ''

If your phone is stuck at this annoying issue, download the software to resolve it hassle-free. Try out its free trial and check out its amazing features for free.

Method 2: Use Tenorshare ReiBoot to Resolve the ‘’

On seeing the Restore display on the iOS device, the best method to fix this problem is through a professional repair tool for iOS. This repair tool will assist you in fixing iOS stuck problems that occurred due to software. One such tool is Tenorshare ReiBoot that helps in solving all kinds of iOS-related problems. Plus, you do not lose any data by fixing the issue in this way. It features unique characteristics, which include:

  • A one-click solution for resolving the ‘’ error and the error 1035 for free
  • Tenorshare ReiBoot reinstalls iOS with no data loss
  • It features simple instructions with 100% results

Get Tenorshare ReiBoot

A. Resolve ‘’ in a single click

The tool offers a perfect solution to resolve the ‘’ error or the Recovery Mode stuck. To perform this action, follow the steps given below:

Step 1: Download Tenorshare ReiBoot and install it on your system. Once run, connect your device to the system, and the software will detect your device if it’s in recovery mode already.

Resolve '' in a single click

Step 2: Tap on ‘Exit Recovery Mode,’ and your iPhone will get out of this mode. Within a minute, your iPhone will normally reboot.

Resolve '' in a single click

B. Reinstall iOS for resolving the issue

If you are still struggling with the ‘’ screen, then you require reinstalling iOS. Tenorshare ReiBoot offers a feature called ‘Repair Operating System‘ that fully restores and reinstalls iOS to eliminate issues like ‘’ with no data loss.

Step 1: In the first place, you need to connect your device to your system. After that, choose the ‘Repair Operating System‘ option on Tenorshare ReiBoot after the program has detected your device successfully.

Reinstall iOS for resolving the issue

Step 2: Now, choose the option ‘Fix Now‘ and download a firmware package for reinstalling iOS.

Reinstall iOS for resolving the issue

Step 3: After this downloading procedure is over; you need to tap on ‘Start Repair‘ for reinstalling iOS. Once the restoring procedure ends, you will no longer face the issue ‘‘ without losing any data.

Reinstall iOS for resolving the issue

Method 3: Force Restart your Device to Fix ‘’ Issue

So, force restarting your device also helps in getting rid of this recovery stuck error. The process of force restarting your device is different for different iPhone models. So, follow the procedure below according to your device model.

iPhone 6 or earlier models:

Firstly, hold down the keys ‘Home‘ and ‘Power‘ simultaneously. Once you see the Apple icon on your display, release these tabs.

iPhone 7 Plus/7:

for restarting the device, press the keys ‘Volume Down‘ and ‘Power‘ together. After 10 seconds, users will get the Apple logo on their phone screen. Now, let go of these buttons.

iPhone 8 or recent models:

Press the tab ‘Volume Up‘ briefly and then press the key ‘Volume Down‘ and release it. Next, follow up with a long press on the key ‘Power‘ until you have the Apple logo on your screen.

Force Restart your Device to Fix the '' Issue

Method 4: Look for iTunes Update

In many cases, the issue ‘’ could occur on the iPhone because of using an old version of iTunes on the system when you restore tasks, perform the downgrade, or update. So, update iTunes on the system and get rid of this annoying screen. To follow up, read the instructions below:


Firstly, launch iTunes and then tap on the ‘Help‘ tab. Now, choose the ‘Check for Updates‘ option from the listed options. After that, follow the instructions on your screen to complete the update procedure.

Look for iTunes Update


Initially, open App Store and look for any iTunes update. Tap on ‘Update‘ if you come across a new iTunes version.

Update iTunes to Fix the '' Issue

Method 5: Restore your Device Through DFU Mode

To get rid of ‘,’ you can enter the DFU mode that erases all the data on the device. For this, follow the given steps below:

Step 1: Connect your device to your system and then launch iTunes. To put the iPhone in the DFU mode, go through the instructions as:

iPhone 6 or earlier models:

Press the tabs ‘Home‘ and ‘Power‘ simultaneously, and after 10 seconds, just release the ‘Power‘ tab. Keep on holding the tab ‘Home‘ until you get a notification that iTunes detected the iPhone in recovery mode. Next, release this button also.

iPhone 7 Plus/7:

For these models, the steps are almost the same. However, you need to hold the tab ‘Volume‘ in place of the tab ‘Home.’

iPhone X/8 Plus/8:

Press the tab ‘Volume Up‘ quickly and then the ‘Volume Down’ one. After that, hold the key ‘Power.’ Stay for some seconds until the screen of your device goes black. Keep on pressing the tab ‘Power‘ and then start pressing the key ‘Volume Down.’ Let go of the tab ‘Power‘ now and keep on holding the other key until you will be notified from iTunes regarding the device’s detection.

Step 2: Over iTunes, tap on the option ‘Restore‘ present near the message window. Then, you need to confirm your action. Hopefully, you won’t see this frustrating issue anymore.

Restore your Device Through DFU Mode to fix Fix the '' Issue

Method 6: Seek Assistance from Apple

If none of the methods work for you in resolving the ‘’ error, then the issue could be because of some hardware damage. It is recommended to pay a visit to a nearby Apple Care immediately. Go there and explain the whole scenario of how and when you started experiencing the issue ‘’ After that, they will surely help you in getting your device back to normal after replacing the hardware component.

Now, you know what you need to do to get rid of the ‘‘ message on your iPhone. If the issue occurs due to some system-related problems, then iMyFoneFixppo is an ideal solution. Tenorshare ReiBoot is another great way to get rid of the ‘’ screen. These iOS repair tools have been trusted and recommended by various media sites. If you are dealing with some hardware issues, then it is advisable to visit the Apple support center for having a check on your iPhone.

Get iMyFone Fixppo Get Tenorshare ReiBoot