Scanning and Repairing Drive Stuck? Let’s Get It Fixed Easily

If you are using Windows 10, scanning and repairing drive stuck would be an annoying issue for you. In fact, a considerable number of users across various regions have already experienced this issue. In certain cases, scanning and repairing drive stuck can last up to several hours. Moreover, some computers give this trouble every time it is switched on. Well, if you are looking for a solid solution to overcome this issue, this is a must-read article.

Reason for scanning and repairing drive stuck on your Windows 10 computer

The reason behind the scanning and repairing drive stuck on Windows 10 is an improper shutting down. That means, if your Windows computer hasn’t been shut down properly, you are likely to experience this annoyance. The improper shutdown can often appear due to power failure. Also, it can occur as a result of the forced shutdown. You may see the error message from the first time you switch on the PC after an improper shutdown.

When Windows OS is running, the relevant operational data will be read and written on Random Access Memory (RAM). When the computer is shut down unexpectedly, the data stored in the RAM will be lost. In addition to that, such an incident can cause damages to the hard disk as well. When you try to boot the computer next time, the system will automatically scan and repair those corrupted files.

We highly recommend our readers to avoid turning off the PC improperly while it is functioning. Otherwise, you are likely to lose important data.

Also, get to know the best solution for the directory name is invalid and NTFS.sys error.

How to stop scanning and repairing drive process?

It is true that the scanning and repairing process is likely to last for a considerable time. Wasting a couple of productive hours looking at your computer screen is a ‘crime’. As of today, we all live a very busy lifestyle, and we hardly can wait for this process to be completed. In this case, you will have to find a way to skip this scanning and repairing process. After booting the computer into the normal mode, you can perform a manual scan and repair it later on. Repairing the drive manually is an exceptionally important process if you really want smooth performance from your PC. Well, if you receive the scanning and repairing drive process, below are the steps to follow.

Please note that some of these methods work on Windows 10 Normal mode. Other methods are applicable when Windows doesn’t boot successfully. You may choose the method depending on the case.

Besides, here is the full Driver Talent review as well as how to fix Microsoft Compatibility Telemetry for you too.

Part 1. How to resolve ‘scanning and repairing drive stuck’ on Normal Mode?

In this section, let’s discuss two methods to fix scanning and repairing drive stuck that apply to Windows Normal Mode.

Way 1: Make use of the Windows Error Checking utility

In this method, we will be using the Windows Error Checking tool that is found in drive properties. Through this option, you will be able to scan and repair the potential issues on the drive. The following are the steps you should follow to make use of this built-in utility.

1. Go to the File Explore option located on the taskbar

2. Select the option “This PC” and expand the options to see Devices and Drives

3. Right-click on the drive which Windows tried to scan when you boot the computer. You can determine this simply by looking at the error message on the screen once again. The message usually says “scanning and repairing drive (drive letter)“.

4. Go to the tab labeled “Tools” and click on the button “Check” located under the tab “Error checking“.

5. If there are errors on Windows, you will be able to see a message saying “Repair this drive“.

6. However, if there are no errors, you can see a message saying “Scan drive“. You should click on “Scan drive anyway“. The operating system will start to scan and repair the drive by itself now.

7. Perform a reboot on the PC and see if the problem is solved.

Way 2: Perform a drive status check

If there are issues associated with the drive, you will see that Windows will detect them. Then, the system itself will help you scan the errors and repair them. To fix these issues, like ‘scanning and repairing drive stuck’, you will have to check the drive status. Follow the steps mentioned below to do it.

1. Go to the Control Panel of the computer

2. Change the view of the window to small icons and select the option “Security and Maintenance

3. Click on the option “Maintenance

4. Under the option “Drive Status“, you will see that there are several potential issues listed down

5. Each of those issues will accompany a link

6. Just click on the relevant link to repair the respective drive

Part 2. How to resolve ‘scanning and repairing drive stuck’ if Windows doesn’t boot

As mentioned before, this section explains what you should do to resolve the ‘scanning and repairing drive stuck’ issue if Windows doesn’t boot

Way 1: Perform a CHKDSK through Safe Mode

As the first step of the process, let’s see how to run CHKDSK command through the Safe Mode. This process is a pretty simple one as you don’t need any expertise to do it. If Windows doesn’t boot successfully and you need to skip scanning and repairing the drive, this would be handy.

1. Boot your Windows computer in Safe Mode

2. On the keyboard, you should press Windows and R key simultaneously and open up “Run” command

3. Then, type in the letters CMD and press Ctrl + Shift + Enter keys simultaneously. This will open the CMD on administrator mode. If you press OK or press the enter key, you cannot enter the command prompt through the administrator mode.

4. You will then have to type the command mentioned below
chkdsk x: /f

Please note that letter “x” should be replaced with the relevant drive letter where you see the issue.

5. At the completion of the scan, you will be able to restart the computer. You should then check if the issue is fixed.

Way 2: Use Safe Mode and enter “Repair-Volume -DriveLetter”

This is another method you should try to make PowerShell utility on the system. It will run the specific command, Repair-Volume -DriveLetter. This option will scan for the hard disc errors and repair them easily. Mentioned below are the steps to do so.

1. Boot your computer on Windows 10 Safe Mode

2. Key in the letters “powershell” in the search box and bring the menu up

3. Right click on the Windows PowerShell and then select the option “Run as Administrator

4. You should now type the command lines mentioned below and hit “Enter
Repair-volume -driveletter X

Please note that you will have to replace the letter “X” with the drive you intend to repair.

5. At the completion of the process, you should restart the computer and see if it is solved

The above options should fix the issue for most of the users. However, if they don’t, you should try updating the drives. That is because, in certain cases, even the outdated or crashed drives can be the cause.

Updating Drivers

Although updating drivers is not that hard for many users, it can be a time-consuming task. If you’re a novice or don’t have time to waste on updating drivers manually, try a professional tool. This is when a driver updater like Driver Easy comes to play.

With the assistance of Driver Easy, you will be able to update all the outdated drivers at once. Finding the most appropriate driver version and installing it is pretty simple with Driver Easy. This tool will save you plenty of time and protect you from drivers that have malicious software.

By using the free version of Driver Easy, you can download and install the drivers one by one. However, if you need to download and install all the drivers with the two-click operation, use Pro Version.

Here’s how to use it

1. Download the Driver Easy software and install it

Download Driver Easy

2. Launch Driver Easy software and hit “Scan Now” button

3. Now, Driver Easy will perform a thorough scan on the computer and see if there are any issues

4. Click on the “Update” button next to each device and get the drivers downloaded

5. However, if you have the pro version, you can download and install all the drivers at once

Bonus Tip: Recovering data on Windows 10 computer after performing a system restore

Some of the errors associated with Windows 10 may need a system recovery to get solved, such as cannot open volume for direct accessthe system cannot find the file specified. However, when performing a critical system repair, your data may lose. So, it is handy for you to know a software that can recover data.

This is when software like EaseUS Data Recovery comes into play. This software can recover all the lost data from your hard drive that underwent a repair. This software is recognized to be one of the most reliable data recovery tools for Windows. Please make sure that you save your valuable data on a separate hard drive after recovering.

Learn more about Easeus Data Recovery

Well, that is how to solve ‘scanning and repairing drive stuck‘ on your Windows computer. We hope this article would be of some use for our Windows-using-readers.