RepairWindows

Different Methods to Resolve ‘Netwtw06.sys Failed’

It is quite common for users to face the ‘netwtw06.sys failed‘ error on their Windows 10. Users can come across the blue screen of death when they try launching an application or disconnecting any external device from their system. It is important to resolve this error immediately.

netwtw06.sys

Usually, netwtw06.sys error comes along the error messages, ‘DRIVER_IRQL_NOT_LESS_OR_EQUAL’ and ‘PAGE_FAULT_IN_NONPAGED_AREA, SYSTEM_THREAD_EXCEPTION_NOT_HANDLED‘. Now, why does this netwtw06.sys failed issue show up in the first place? This issue may happen because of the misconfigured device drivers, corrupted files, corrupted Windows registry, outdated drivers, and broken system files. Now, let’s see how to resolve the netwtw06.sys error on Windows using different solutions!


Solution 1: Update Your Wireless Network Driver to Fix ‘Netwtw06.sys Failed’

As stated above, outdated drivers can trigger netwtw06.sys failed error. So, if your wireless network driver is of the older version, then updating the driver is the best thing that you can do to deal with this annoying issue. To eliminate this issue, you can manually update your wireless network driver.

Steps to eliminate the netwtw06.sys error by updating the driver:

It is very simple to carry out this procedure. Have a look at the steps below:

Step 1: Choose ‘Device Manager’

First, right-tap on the ‘Start‘ tab for choosing the ‘Device Manager‘ option.

Step 2: Select ‘Update Driver’

From there, double-tap on ‘Network Adapters‘ and then, right-click on the driver labeled as ‘Wi-Fi Adapter.’ Next, select the ‘Update Driver‘ option.

Step 3: Install the recent version

Select ‘Search automatically for updated driver software.’ Now, your system will download the latest version and install the same for your wireless network driver.

Step 4:Restart the system

Start your Windows PC again and check if the netwtw06.sys error still persists or not.

PS: let’s learn more about how to fix the Windows NDIS.SYS Blue Screen Error and 0x0000007b Windows error effortlessly.


Solution 2: Roll Back Your Wireless Network Driver to Fix ‘Netwtw06.sys Failed’

Are you struggling with the ‘netwtw06.sys failed’ issue after updating the wireless network driver? If so, then rolling back the wireless network driver is the next thing you can try. This is because sometimes new versions come up with some glitches and bugs.
In that case, it is best to go back to your driver’s previous version to deal with the problem if you are facing the netwtw06.sys issue after updating your driver to the latest version.

Steps to resolve the netwtw06.sys error by rolling back the network driver:

To perform this action, go through the following instructions:

Step 1: Select ‘Device Manager’

Press the tabs ‘Win‘ and ‘X’ simultaneously for choosing the ‘Device Manager‘ tab.

Step 2: Choose the ‘Properties’ tab

Next, double-tap on ‘Network Adapters‘ for expanding and then, right-tap on the driver labeled as ‘Wi-Fi adapter‘ for selecting the ‘Properties‘ tab.

Roll Back Your Wireless Network Driver

Step 3: Choose ‘Roll Back Driver’

Now, visit ‘Driver‘ and then tap on the ‘Roll Back Driver‘ option for installing the driver’s stable version.

Step 4: Reboot the system

Reboot the system for taking the changes in effect. Now, see if the issue netwtw06.sys failed has been resolved.

Besides, if you are experiencing the DISM error 87 or the error 0x80300001, here are the top solutions for you.


Solution 3: Launch SFC for Eliminating the Netwtw06.sys Error

For making the Windows system run normally, system files remain very crucial. One cannot remove these files manually, even if they have the permissions. If your computer has several corrupted system files on it, then various errors can show up like the netwtw06.sys failed error. For eliminating this annoying issue, you have to launch the SFC tool.

Steps for running this SFC tool to resolve this issue:

In order to eliminate this frustrating issue, you can try running this SFC tool in the following way. It is easy to perform this action.

Step 1: Right-click on ‘Command Prompt’

In the search column, type cmd and right-click on ‘Command Prompt‘ for selecting ‘Run as administrator.’ Tap ‘Yes‘ to view ‘User Account Control.’

Step 2: Hit Enter

Put in ‘sfc/scannow‘ and then hit Enter.

Launch SFC for Eliminating the Netwtw06.sys Error

Step 3: Wait for some time

You need to wait for this process to end without interruptions. Usually, it detects the damaged files and automatically repairs them.

Now, restart the computer for checking whether the netwtw06.sys failed issue is fixed on your Windows PC.

Besides, regarding the issues of unexpected_kernel_mode_trap or Entry Point Not Found, click to fix them now.


Solution 4: Run DISM to Resolve the Netwtw06.sys Failed Issue

If the above method doesn’t resolve the issue, you should try running the DISM tool. Also, DISM helps to scan damaged system files and automatically repair them. So, you can give it a shot to eliminate the netwtw06.sys issue on your Windows computer.

Steps for running DISM to resolve the netwtw06.sys error:

To run this DISM tool on your system, follow the instructions given below.

Step 1: Open the Command Prompt

First, open the Command Prompt and select ‘Run as Administrator‘ as stated in the above method.

Step 2: Hit Enter

Next, enter “DISM.exe/Online/Cleanup-image/Restorehealth” and then hit Enter on your keyboard.

Run DISM to Resolve the Netwtw06.sys Failed Issue

Step 3: Reboot the system

Now, wait for the process to end. The process might take a bit longer to end if some corruption is located. Restart your computer to see if the netwtw06.sys failed error has been successfully eliminated.


Solution 5: Launch CHKDSK for Fixing the Netwtw06.sys Error

Sometimes, the netwtw06.sys failed issue occurs because of the corrupted hard drive. Thus, you need to launch the CHKDSK tool for checking if there are any bad sectors on your drive and then resolve them.

Steps to resolve the netwtw06.sys error by running CHKDSK:

Running the CHKDSK tool to get rid of the netwtw06.sys failed error is helpful. To do this, follow the step-wise guide mentioned below.

Step 1: Open the Command Prompt

First, please open the Command Prompt window & then run it as administrator.

Step 2: Hit Enter

In the next window, enter “chkdsk C:/f /r /x” and then hit Enter. Here, C is the drive where you save the operating system.

Launch CHKDSK for Fixing the Netwtw06.sys Error

Note: If you come across an error message claiming that “Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts”, then put in “Y” in the Command Prompt window.

Step 3: Reboot the system

Once the process gets over, reboot the system and see if the netwtw06.sys failed error has been fixed.


Solution 6: Carry Out the System Restore to Fix ‘Netwtw06.sys Failed’

If you already have a system restore point on your system in advance, you can carry out the system restore for reverting the system to an earlier normal state. For performing this action, you need to go through the following instructions.

Steps to resolve the netwtw06.sys error:

To eliminate this frustrating issue from your computer, follow the instructions listed below.

Step 1: Launch the Run dialog box

In the first place, you have to press the tabs ‘Win‘ and ‘R‘ together. This will launch the Run dialog box.

Step 2: Open the ‘System Restore’ tab

Now, put in “rstrui” in the dialog box and then press OK for opening the System Restore tab.

Step 3: Tap on ‘Next’

From the next window, choose the ‘Next‘ tab. After that, you have to select a system restore point from the given options and then tap on the ‘Next‘ tab.

Step 4: Tap on ‘Finish’

Lastly, confirm the system restore point. Then, press the ‘Finish‘ option. Now, you will come across a message reporting “Once started, System Restore cannot be interrupted. Do you want to continue?” You have to click on ‘Yes.’

Carry Out the System Restore

Once this system restoring procedure is over, your system will normally run after getting rid of the netwtw06.sys failed issue.


Another Tip: How to Access Lost Data on Your Windows PC After Accidentally Losing It

It is quite possible to lose your precious files from the system while trying to get rid of this frustrating netwtw06.sys error. Don’t worry if you face this situation because there is a simple way to retrieve your lost data.

Most users do not really expect to ever get back their precious files once they lose them accidentally. Today, there are various powerful data recovery programs present on the internet, which are capable of recovering lost data completely. One such advanced tool is Tenorshare UltData for Windows.

Tenorshare UltData for Windows works the best to retrieve lost data on Windows PC. Some tech-websites and many users recommend this program due to its reliability and precision work. Now, let’s find out how to retrieve your data if accidentally deleted during the netwtw06.sys failed fixing process.

Steps to get back your lost data with Tenorshare UltData for Windows:

With Tenorshare UltData, users can get back their lost data within some minutes using the steps listed below.

Get Tenorshare UltData for Windows

Step 1: Install Tenorshare UltData

Initially, users have to download Tenorshare UltData and install the same on their Windows PC. After that, they need to run the program.

Step 2: Choose ‘The Whole Computer’

Now, users need to select the partition from where they have lost their files. If they do not know about the exact partition, then it is better to go with the ‘The Whole Computer‘ option.

Tenorshare UltData for Windows

Step 3: Tap on ‘Scan’

Next, they have to choose ‘Scan‘ from the menu. Now, their system will be thoroughly scanned.

Step 4: Preview your files

Once the scanning process is over, users can preview the scanned results available to them. This means that you can restore the files selectively.

Tenorshare UltData for Windows

Step 5: Tap on ‘Recover’

Lastly, users just need to choose the files they like and then, tap on the tab ‘Recover‘ present below.

Tenorshare UltData for Windows

So, this is the simplest method to recover lost files on your Windows PC if you have accidentally lost your files while eliminating the netwtw06.sys failed error.


Conclusion on How to Fix ‘Netwtw06.sys Failed’

So, don’t worry when the netwtw06.sys failed error flashes on your Windows PC. This is because you have several ways to deal with this annoying issue. Make use of the above-mentioned useful methods to deal with the netwtw06.sys error. All of these methods are pretty effective. You do not need to try all of them. Just go through them one by one until you fix the issue effectively.

However, there is a possibility of losing your precious data because of the adverse effects of the netwtw06.sys failed issue. So, use Tenorshare UltData for Windows to retrieve your lost data from the Windows PC. Now, download Tenorshare UltData for recovering files hassle-free.

Try Tenorshare UltData for Windows

Related Articles

Back to top button