The IDE is what we know as the Integrated Drive Electronics. The IDE hard drive is a kind of cable that we can use to connect to the motherboard on the computer. With the IDE hard drive, you can easily transfer the data through the cable, so that all the data stored on the IDE hard drive is safe. If you back up your files on the IDE hard drive, you will find it is more convenient than the other way.
The IDE hard drive is now compatible with all the computers, including IBM. All the files stored on the IDE hard drive are well controlled. Simply connect the devices like the disc or the hard drive or the CD ROM drive to the IDE hard drive, and you can the information stored without hassle. So the main use of the IDE hard drive is that you can control the files and protect them with it.
The STSA hard drive is also widely used as the IDE hard drive. Both of them can finish the task when you connect them to the computer. But there are some differences between these two hard drives.
The SATA hard drive is what we call the Serial Advanced Technology Attachment hard drive. You can do hot-plugging with this hard drive on your computer. With large storage space, it is not expensive, and it supports many devices connected. The transfer rate of this hard drive can reach from 150 MB/s to 600 MB/s. And it can also connect to the motherland.
Well, the IDE hard drive has higher compatibility. But you can not perform hot-plugging with it. And the data transfer rate can only reach to 133 MB/s. And it has a ribbon-like data cable.
If you lose the data on the IDE hard drive, there are some ways to recover them with ease.
First of all, you need to check if the files lost are still stored in the recycle bin. It often happens when you delete some important files by yourself accidentally.
Second, you can use the relevant backup files that you created before. Make sure that the files you want are contained.
Finally, if the files you want to recover are not on the recycle bin, and you have no backup files on your computer, you can use a recovery tool to help you recycle the files.
There is a recovery tool recommended, called the UltData Data Recovery. The UltData is a professional recovery tool, you can recover the data lost because of a system problem, wrong deletion, and virus attack. It has a user-friendly interface. And it is really easy to use. Simply refer to the following passages:
Step 1. Download and install
Download the suitable version of UltData Data Recovery depending on the system operation of your computer. For example, if you are a user of Windows, you need to download the version for Windows. And then after downloading, you can start to install it on your computer. The installation wizard will offer you a detailed guide to tell you how to do it.
Step 2. Start to scan for the files you lost
Then click “Scan” and UltData – Windows will thoroughly scan.
Step 3. Preview the files found
After a few minutes, the scanning process will finish. And you can get a list of files recoverable. The UltData Data Recovery will allow you to preview all the files. So that you can carefully choose the very one you want to recover. While you preview them, you can check them on the little boxes before if you want to recover the items.
Step 4. Recover the files chosen
Now if you have finished choosing the files, you can start to recover them. Simply click on the “Recover” button on the lower right. And soon, you will get a new window, on which you can choose the location for the files ready-to-be-recovered on the IDE hard drive. Take a mind note of the new location because you won’t like to find it all over the hard drive.
Step 5. Check the files recovered
After another period of time, the UltData Data Recovery will remind you that it has finished the task you gave. And now you can go to the location that you chose for the files recovered. And it is also advisable that you check the files one by one, to see it you have already recovered all the files you want. If it is not the case, perhaps you can do the recovering process once again right now. Because if you don’t do it, but keep on using your computer, the files you want may simply be overwritten by the other data by accident.